Applying your Munch-N-Done

The Munch-N-Done ® is a lightweight solution to the nibbling issue. The strapping is not designed to be cinched down tight around the muzzle. The elastic in the strapping should not be stretched out if applied correctly, and if using a nose band loop, it should not be pulling your nose band down.

Step 1: After removing the Munch-N-Done® from it’s package, pop and smooth the darts out to create a nice basket shape to form around your horse’s muzzle. It is designed to be form filling, and will cup the muzzle snugly.

Step 2: The Upper Munch-N-Done® strap (Longer strapping with our Logo on it) is fed through the headstall cheek-piece loops on both sides, from top to bottom, where your bit is attached to the headstall.   Once fed through, go back up behind the cheek piece, against your horse’s skin, and feed, from the top again, back down through the cheek piece loop.    You are creating a loop with our strapping, around the backside of your headstall cheek-piece loop.

Step 3: The Upper strapping loop velcro is then pressed firmly into the lower strapping hook velcro under the horse’s chin.

Step 4: Check to ensure the Munch-N-Done® is centered on the horse’s nose, and fitted snugly, but not tightly.  The elastic should NOT be stretched out when applied correctly.  The basket of the muzzle should seat up against the front of your horses’ muzzle.  If it does not, your Munch-N-Done® may be too small.   Excess velcro can then be trimmed off with a scissors for a neater look.